Toro GrandStand 74534 Service Manual page 240

22. 40" Deck: Using a spring tool, remove the exten-
sion spring from the deck anchor post (Fig. 773).
Fig. 773
23. 40" Deck: Using a spring tool, remove the RH
spindle extension spring from the RH deck anchor
post (Fig. 774).
Fig. 774
36" & 40" Toro GrandStand Service Manual
24. Raise the machine so the underside of the chassis
can be accessed.
25. Remove the cable tie securing the clutch wire
harness to the clutch anchor (Fig. 775).
DSCN-2564a
26. Remove the deck belt from the clutch pulley (Fig.
776).
DSCN-2582a
ELECTRICAL
Fig. 775 DSCN-2566a
Fig. 776 DSCN-2569a 8
8-19