Toro GrandStand 74534 Service Manual page 64

52. Secure the rear struts to the frame and engine base
using the bolts, large washers, and flange nuts (Fig.
174).
Fig. 174
53. Secure the high pressure hoses to the pump (Fig.
175).
Note: Ensure the hose is installed to the correct
wheel motor fitting by using the identification
markings. If installed incorrectly, wheel
direction will be reversed.
Fig. 175
36" & 40" Toro GrandStand Service Manual
54. Loop the hoses around the control cables (Fig. 176).
DSCN-4215a
55. Install the hoses to the wheel motor (Fig. 177).
Note: Ensure the hose is installed to the correct
wheel motor fitting by using the identification
markings. If installed incorrectly, wheel
direction will be reversed.
DSCN-4222a
CHASSIS
Fig. 176 DSCN-4224a
Fig. 177 DSCN-4227a
3
3-45