Toro GrandStand 74534 Service Manual page 70

3. Install the pivot rod into the center of the control
handle (Fig. 191).
Fig. 191
4. Secure the control handle assembly in the control
tower using two bolts (Fig. 192).
Fig. 192
36" & 40" Toro GrandStand Service Manual
5. Secure the control cable to the motion control lever
using the shoulder bolt and flange nut (Fig. 193).
DSCN-3591a
6. Position the neutral switch bolt so the gap between
it and the switch is between .05" and .09" (1.27 and
2.29mm). Secure the position using the jam nut (Fig.
194).
DSCN-3573a
A. .05" to .09" (1.27 to 2.29mm)
CONTROLS
Fig. 193 DSCN-3570
A
Fig. 194 DSCN-3603a
4
4-3