MOWER DECK
40" Mower Deck Belts Replacement
40" Mower Deck RH Spindle Belt Removal
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1" (25mm) HOC.
3. Remove the RH belt cover.
4. Remove the RH extension spring from the anchor
post (Fig. 547).
5. Remove the RH belt from the deck pulleys (Fig.
548).
7
7-2
Fig. 547
DSCN-3117a
Fig. 548
DSCN-3119a
40" Mower Deck RH Spindle Belt
Installation
1. Route the RH belt around the deck pulleys (Fig.
549). Form 3368-755, Page 10, Belt Routing
Fig. 549
2. Install the extension spring to the RH idler bracket
and spring anchor (Fig. 550).
Fig. 550
3. Install the RH belt cover.
36" & 40" Toro GrandStand Service Manual
fig. 119-0187
DSCN-3117a