Toro GrandStand 74534 Service Manual page 130

36. Make sure the muffler exhaust is centered in the
muffler guard assembly, then tighten all four bolts
and nuts. Torque the nuts to 19 ± 2 ft-lbs. (25.76 ±
2.7 Nm) (Fig. 410).
Fig. 410
37. Connect the clutch wire harness to the wire harness
(Fig. 411).
Fig. 411
36" & 40" Toro GrandStand Service Manual
38. Install the battery ground wire and the wiring
harness ground wire to the engine block (Fig. 412).
DSCN-2680a
39. Install the starter wire to the solenoid using a lock
washer and nut. Torque nut to 35 in-lbs (4 Nm) (Fig.
413).
DSCN-2686a
ENGINE
Fig. 412 DSCN-2688a
Fig. 413 DSCN-2533a
5
5-19