MOWER DECK
4. Raise the HOC handle to the transport position.
Guide the engine base onto the screws protruding
through the deck (Fig. 706).
Note: The rear deck mounts must be to the inside of
the engine base mounts (Fig. 707).
7
7-46
Fig. 706
DSCN-3430a
Fig. 707
DSCN-3437a
5. Loosely install the flange nuts onto the two screws
(Fig. 708).
Fig. 708
6. Loosely install the two sets of carriage bolts through
the deck and engine base (Fig. 709).
Fig. 709
36" & 40" Toro GrandStand Service Manual
DSCN-3442a
DSCN-3440a