Toro GrandStand 74534 Service Manual page 47

CHASSIS
34. Using two people or a hoist, lift the rear of the carrier
frame and tower assembly. Walk the carrier frame
and tower assembly forward over the engine and
deck assembly (Fig. 108).
3
35. Remove the extension spring from the pump idler
assembly and anchor bolt (Fig. 109).
3-28
Fig. 108 DSCN-4067a
Fig. 109 DSCN-4070a
36. Remove the pump drive belt.
37. Remove the bolt and nut securing the idler arm
assembly to the engine base (Fig. 110).
Fig. 110
38. Remove the nut securing the spring anchor post to
the engine base (Fig. 111).
Fig. 111
36" & 40" Toro GrandStand Service Manual
DSCN-4075a
DSCN-4072a