Toro GrandStand 74534 Service Manual page 89

CONTROLS
5. Position the bolt, washer, and spacers into the rear
of the HOC plates (Fig. 260).
4
6. Loosely secure the HOC plates assembly to the
control tower using the flange nut (Fig. 261).
4-22
Fig. 260 DSCN-3891a
Fig. 261
DSCN-3895a
7. Position the HOC handle pivot shaft through the
frame hub (Fig. 262).
Fig. 262
36" & 40" Toro GrandStand Service Manual
DSCN-3900a