Toro GrandStand 74534 Service Manual page 42

9. Remove the cable tie securing the choke and throttle
cables to the oil drain (Fig. 088).
Fig. 088
10. Raise the rear of the machine so the underside can
be accessed.
11. Remove the four sets of bolts, washers, and nuts
securing the rear struts to engine base and carrier
frame (Fig. 089).
Fig. 089
36" & 40" Toro GrandStand Service Manual
12. Lower the machine.
13. Place two boards under the mower deck, then lower
the deck onto the boards (Fig. 090).
DSCN-2683a
14. Remove the four sets of bolts and nuts securing the
deck lift chains to the mower deck (Fig. 091).
DSCN-4215a
CHASSIS
Fig. 090 DSCN-3990a
Fig. 091
DSCN-4179a
3
3-23