Toro GrandStand 74534 Service Manual page 84

3. Position the brake handle through the control tower
and secure the handle to the tower using the bolt,
washer, and nut (Fig. 242).
Note: Do not over tighten. The handle needs to
move freely.
Fig. 242
4. Install the grip onto the brake lever (Fig. 243).
Fig. 243
36" & 40" Toro GrandStand Service Manual
5. Secure the upper end of the brake rod to the brake
handle using the flange nut (Fig. 244).
DSCN-3819a
DSCN-3822a
CONTROLS
Fig. 244 DSCN-3817a
4
4-17