HYDRAULIC DRIVE SYSTEM
11. Install the second high pressure hose to the pump
(Fig. 470).
12. Loop the hose around the control cables and
opposite side pump hoses (Fig. 471).
6
6-14
Fig. 470
DSCN-3059a
Fig. 471
DSCN-3061a
13. Install the hose to the wheel motor (Fig. 472).
Fig. 472
14. Secure the control cable to the pump control arm
(Fig. 473).
Fig. 473
36" & 40" Toro GrandStand Service Manual
DSCN-3063a
DSCN-2978a