Toro GrandStand 74534 Service Manual page 146

8. Install the high pressure hose to the pump (Fig.
467).
Note: Ensure the hose is installed to the correct
pump fitting by using the identification mark­
ings. If installed incorrectly, wheel direction
will be reversed.
Fig. 467
9. Loop the hose around the control cables and
opposite side pump hoses (Fig. 468).
Fig. 468
36" & 40" Toro GrandStand Service Manual
HYDRAULIC DRIVE SYSTEM
10. Install the hose to the wheel motor (Fig. 469).
Note: Ensure the hose is installed to the correct
wheel motor fitting by using the identification
markings. If installed incorrectly, wheel
direction will be reversed.
DSCN-3052a
DSCN-3055a
Fig. 469 DSCN-3057a
6
6-13