Toro GrandStand 74534 Service Manual page 61

CHASSIS
39. Position the muffler guard assembly and loosely
install the four carriage bolts, two mounting guard
brackets and nuts (Fig. 162).
3
40. Make sure the muffler exhaust is centered in the
muffler guard assembly, then tighten all four bolts
and nuts. Torque the nuts to 19 ± 2 ft-lbs (25.76 ±
2.7 Nm) (Fig. 163).
3-42
Fig. 162 DSCN-2678a
Fig. 163 DSCN-2680a
41. Secure the wire harness to the engine base using
the wire harness plastic anchors.
42. Connect the clutch wire harness to the wire harness
(Fig. 164).
Fig. 164
43. Install the battery ground cable and the wiring
harness ground wire to the engine block (Fig. 165).
Fig. 165
36" & 40" Toro GrandStand Service Manual
DSCN-2686a
DSCN-2688a