Toro GrandStand 74534 Service Manual page 65

CHASSIS
56. Install the high pressure hoses to the opposite pump
(Fig. 178).
3
Note: Ensure the hoses are installed to the correct
pump fittings by using the identification
markings. If installed incorrectly, wheel
direction will be reversed. Loop the hoses
around the control cables and opposite side
pump hoses (Fig. 179).
3-46
Fig. 178 DSCN-4229a
Fig. 179 DSCN-4231a
57. Install the hoses to the wheel motor fittings (Fig.
180).
Note: Ensure the hoses are installed to the
correct wheel motor fittings by using the
identification markings. If installed incorrectly,
wheel direction will be reversed.
Fig. 180
58. Position the battery on the battery tray. Using the
bolt nut and washer, secure the positive battery
cable to the battery. Using the bolt nut and washer,
secure the negative battery cable to the battery (Fig.
181).
Fig. 181
36" & 40" Toro GrandStand Service Manual
DSCN-4236a
DSCN-2698a