Toro GrandStand 74534 Service Manual page 81

CONTROLS
3. Route the cable upwards, inside of the cable retainer
(Fig. 230).
4
4. Position the cable adjustment nut into the slot on the
cross bracket (Fig. 231).
4-14
Fig. 230 DSCN-3685a
Fig. 231
DSCN-3688a
5. Secure the nut using the spring clip (Fig. 232).
Fig. 232
6. Secure the control cable to the motion control lever
using a shoulder bolt and flange nut (Fig. 233).
Fig. 233
7. Verify the tracking of the machine. See "Adjusting
the Tracking" on page 4-41.
36" & 40" Toro GrandStand Service Manual
DSCN-3690a
DSCN-3671a