ELECTRICAL
Hour Meter/Control Module
Hour Meter/Control Module Removal
1. Remove the wire harness from the back of the hour
meter (Fig. 857).
2. Depress the two tabs securing the hour meter to the
control panel (Fig. 858).
8
8-42
Fig. 857
DSCN-2328a
Fig. 858
DSCN-2330a
3. Remove the hour meter out through the front of the
control panel (Fig. 859).
Fig. 859
36" & 40" Toro GrandStand Service Manual
DSCN-2333a