Parking Brake Switch Installation - Toro GrandStand 74534 Service Manual

Parking Brake Switch Installation

1. Loosely install the two screws and threaded plate
that secure the switch to the brake assembly (Fig.
853).
Fig. 853
2. With the brake engaged, position the switch so there
is an 1/8" (3mm) gap between the switch body and
the tab on the brake arm (Fig. 854).
A
Fig. 854
A. 1/8" (3mm)
36" & 40" Toro GrandStand Service Manual
3. Secure the position of the switch by tightening the
two mounting screws (Fig. 855).
DSCN-2326a
4. Plug the wire harness into the switch (Fig. 856).
DSCN-2213a
ELECTRICAL
Fig. 855 DSCN-2326a
Fig. 856 DSCN-2345a
8
8-41