Toro GrandStand 74534 Service Manual page 25

CHASSIS
8. Position the seal guard onto both sides of the caster
wheel hub (Fig. 020).
3
9. Secure the caster wheel assembly to the caster fork
using the axle bolt and nut (Fig. 021).
3-6
Fig. 020 DSCN-0377a
Fig. 021
DSCN-0376a
10. Install the upper and lower bearing cups into the
pivot tube (Fig. 022).
Fig. 022
Note: A socket can be used as a driver. Take care
not to scar the race surface (Fig. 023).
Fig. 023
36" & 40" Toro GrandStand Service Manual
DSCN-0410a
DSCN-0413a