Toro GrandStand 74534 Service Manual page 254

3. Remove the bolt, washer, and nut securing the red
positive cable to the battery terminal, then remove
the battery (Fig. 825).
Fig. 825
4. Move the terminal cover off the positive cable com-
ing from the battery, then remove the nut and lock
washer securing the positive battery cable and red
wire eyelet to the solenoid (Fig. 826).
Fig. 826
36" & 40" Toro GrandStand Service Manual
5. Remove the nut and lock washer securing the
positive cable that goes to the starter (Fig. 827).
DSCN-2270a
6. Remove the green and blue bullet connectors from
the two small studs on the solenoid (Fig. 828).
DSCN-2353a
ELECTRICAL
Fig. 827 DSCN-2276a
Fig. 828 DSCN-2278a
8
8-33