Toro GrandStand 74534 Service Manual page 101

CONTROLS
7. Remove the two sets of carriage bolts and nuts
securing the speed control assembly to the control
panel (Fig. 305).
4
8. Remove the two sets of carriage bolts and nuts
securing the slider bracket to the control assembly
(Fig. 306).
4-34
Fig. 305 DSCN-3701a
Fig. 306
DSCN-3711a
9. Remove the bolt, nut, and clamp washer securing
the slider assembly to the cable (Fig. 307).
Fig. 307
10. Remove the four sets of bolts, nuts, and spacers
securing the slider plates to the slider assembly (Fig.
308).
Fig. 308
36" & 40" Toro GrandStand Service Manual
DSCN-3718a
DSCN-3720a