HYDRAULIC DRIVE SYSTEM
4. Install the return hose fitting, orientate as shown,
then secure the position using the jam nut (Fig. 463).
5. Secure the pump to the engine base using the
carriage bolts, washers and nuts (Fig. 464).
6
6-12
Fig. 463
DSCN-3029a
Fig. 464
DSCN-3045a
6. Secure the return hose to the pump fitting using the
hose clamp (Fig. 465).
Fig. 465
7. Secure the suction hose to the pump fitting (Fig.
466).
Note: Secure the position of the fitting using the
jam nut.
Fig. 466
36" & 40" Toro GrandStand Service Manual
DSCN-3049a
DSCN-3051a