Toro GrandStand 74534 Service Manual page 126

19. Secure the wire harness to the PTO stop bracket
using a cable tie (Fig. 394).
Fig. 394
20. Position the pump drive belt around the engine drive
pulley, the two hydraulic pump pulleys, and the idler
pulley (Fig. 395).
A
E
D
Fig. 395
A. Hydraulic pumps
B. Idler pulley
C. Clutch pulley
36" & 40" Toro GrandStand Service Manual
DSCN-2658a
B
C
F
fig. 67 G012686
D. Clutch retainer
E. Pump drive belt
F. Pump drive pulley
21. Install the extension spring from the idler bracket to
the spring anchor (Fig. 396).
Fig. 396
22. 36" Deck: Route the deck belt around the deck
spindle pulleys. Refer to decal 119-0186 (Fig. 397).
Fig. 397
ENGINE
DSCN-2660a
5
decal 119-0186
5-15