3. Remove the two cable adjustment nuts from the
cross bracket (Fig. 301).
Fig. 301
4. Remove the cable tie securing the fuel vent hose to
the speed control base assembly (Fig. 302).
Fig. 302
36" & 40" Toro GrandStand Service Manual
5. Remove the grip from the speed control lever (Fig.
303).
DSCN-3674a
6. Remove the two sets of bolts and nuts securing the
cross bracket to the control tower (Fig. 304).
Note: Do not remove the wire harness from the
cross bracket. The clearance needed is
gained by removing the mounting hardware.
DSCN-3698a
CONTROLS
Fig. 303
DSCN-3705a
Fig. 304
DSCN-3707a
4
4-33