Engine Base Replacement
Engine Base Removal
1. Remove the negative (black) battery cable from the
battery, then remove the positive (red) cable (Fig.
080).
Fig. 080
2. Remove the two sets of hold down bolts and wing
nuts securing the battery cover (Fig. 081).
Fig. 081
36" & 40" Toro GrandStand Service Manual
3. Remove the deck belt extension spring from the
deck anchor post, then remove the belt from around
the clutch pulley (Fig. 082).
4. Remove the bolt, washer, and nut securing the front
DSCN-3989a
strut to the carrier frame (Fig. 083).
DSCN-4011a
CHASSIS
Fig. 082
DSCN-3995a
Fig. 083
DSCN-3998a
3
3-21