Toro GrandStand 74534 Service Manual page 143

HYDRAULIC DRIVE SYSTEM
16. Remove the low pressure suction line from the pump
fitting (Fig. 455).
17. Move the hose clamp securing the low pressure
return hose to the pump fitting, then remove the
hose (Fig. 456).
6
6-10
Fig. 455 DSCN-2992a
Fig. 456 DSCN-2995a
18. Remove the two sets of bolts, washers and nuts
securing the pump to the engine base (Fig. 457).
Fig. 457
19. Remove the pump.
20. Loosen the jam nut securing the return hose fitting,
then remove the fitting (Fig. 458).
Fig. 458
36" & 40" Toro GrandStand Service Manual
DSCN-3045a
DSCN-3029a