Left Hand Motion Control Assembly Installation - Toro Z580 DFI Z Master Service Manual

Left Hand Motion Control Assembly
Installation
1. Slide a side flange bearing onto each end of the left
hand motion control assembly (Fig. 197).
Fig 197
2. Position the left hand motion control assembly and
control shaft arm assembly into the traction frame
(Fig. 198).
Fig 198
Z580/Z589 DFI Z Master Service Manual
3. Install 2 bolts and nuts securing the side flange
bearing to the inside of the traction frame (Fig. 199).
PICT-3138a
4. Position the left hand control rod assembly into the
traction frame (Fig. 200).
PICT-3134a
CHASSIS
Fig 199 PICT-3128a
Fig 200 PICT-3133a
3
3-55