Toro GrandStand 74534 Service Manual page 239

ELECTRICAL
16. Loosen the screw on the choke cable clamp and
disconnect the choke cable from the engine choke
lever (Fig. 769).
17. Loosen the screw on the throttle cable clamp and
disconnect the throttle cable from the engine throttle
lever (Fig. 770).
8
8-18
Fig. 769
DSCN-2551a
Fig. 770 DSCN-2556a
18. Remove the cable clamp securing the throttle and
choke cable to the engine oil drain (Fig. 771).
Fig. 771
19. Lower the HOC (height of cut) to the lowest HOC.
20. Remove the belt covers.
21. 36" Deck: Using a spring tool, remove the exten-
sion spring from the deck anchor post (Fig. 772).
Fig. 772
36" & 40" Toro GrandStand Service Manual
DSCN-2561a
DSCN-2562a