HYDRAULIC DRIVE SYSTEM
3. Secure the reservoir tank to the tank bracket using
the two sets of bolts, washers and nuts (Fig. 514).
4. Install the suction hose to the suction fitting (Fig.
515).
6
6-26
Fig. 514
DSCN-2890a
Fig. 515
DSCN-2887a
5. Secure the return hose to the return fitting using the
hose clamp (Fig. 516).
Fig. 516
6. Fill the reservoir to the "COLD" fluid level with the
specified hydraulic fluid. See your Operator's Manual
for the specified fluid (Fig. 517).
D
Fig. 517
A. Cap
B. Baffle
7. Purge the air from the hydraulic system. See
"Bleeding the Hydraulic System" on page 6-35.
36" & 40" Toro GrandStand Service Manual
DSCN-2906a
C
A
B
fig. 71 G012685
C. Cold fluid level-full
D. Hot fluid level-full