Toro GrandStand 74534 Service Manual page 152

9. Advance the forcing screw through the wheel hub
until it firmly contacts the wheel motor shaft (Fig.
488).
Fig. 488
10. Tighten the lug nuts evenly (approximately 1/4 to 1/2
turn at a time) until the hub pops off the wheel motor
shaft (Fig. 489).
Fig. 489
36" & 40" Toro GrandStand Service Manual
HYDRAULIC DRIVE SYSTEM
11. Remove the hub puller from the hub.
12. Remove the woodruff key from the wheel motor
shaft keyway (Fig. 490).
DSCN-2817a
13. Mark the hose and motor ports to ensure they are
installed correctly (Fig. 491).
DSCN-2822a
Fig. 490 DSCN-2827a
Fig. 491 DSCN-2829a
6
6-19