12. Remove nut and lock washer securing the starter
wire to the solenoid (Fig. 765).
Fig. 765
13. Unplug the clutch wires from the wiring harness (Fig.
766).
Fig. 766
36" & 40" Toro GrandStand Service Manual
14. Push the grommet and the electrical plug connector
down through the engine base (Fig. 767).
DSCN-2533a
15. Remove the four nuts, two mounting guard brackets
and four carriage bolts securing the muffler guard
assembly to the front frame, then remove the muffler
guard (Fig. 768).
DSCN-2536a
ELECTRICAL
Fig. 767
DSCN-2547
Fig. 768
DSCN-2549
8
8-17