CONTROLS
Choke Cable Installation
1. Feed the choke cable through the mounting hole in
the control panel (Fig. 274).
4
2. Secure the choke cable to the control panel using a
nut (Fig. 275).
4-26
Fig. 274
DSCN-3518a
Fig. 275
DSCN-3515a
3. Feed the cable through the frame, to the left of the
brake linkage (Fig. 276).
Fig. 276
4. Feed the choke cable through the "R" clamp located
on the carrier frame (Fig. 277).
Fig. 277
36" & 40" Toro GrandStand Service Manual
DSCN-3519a
DSCN-3522a