Toro GrandStand 74534 Service Manual page 141

HYDRAULIC DRIVE SYSTEM
8. Remove the belt from around the pump pulley (Fig.
447).
9. Remove the two set screws securing the pump
pulley to the pulley shaft, then remove the pulley
(Fig. 448).
6
6-8
Fig. 447 DSCN-2962a
Fig. 448 DSCN-2965a
10. Remove the key from the pulley shaft keyway (Fig.
449).
Fig. 449
11. Remove the bolt and nut securing the control cable
to the pump control arm (Fig. 450).
Fig. 450
36" & 40" Toro GrandStand Service Manual
DSCN-2971a
DSCN-2978a