Toro GrandStand 74534 Service Manual page 246

11. Secure the wire harness to the PTO stop bracket
using a cable tie (Fig. 795).
Fig. 795
12. Position the pump drive belt around the engine drive
pulley, the two hydraulic pump pulleys, and the idler
pulley (Fig. 796).
A
E
D
Fig. 796
A. Hydraulic pumps
B. Idler pulley
C. Clutch pulley
36" & 40" Toro GrandStand Service Manual
DSCN-2658a
B
C
F
fig. 67 G012686
D. Clutch retainer
E. Pump drive belt
F. Pump drive pulley
ELECTRICAL
13. Install the extension spring from the idler bracket to
the spring anchor (Fig. 797).
Fig. 797
14. 36" Deck: Route the deck belt around the deck
spindle pulleys. Refer to decal 119-0186 (Fig. 798).
Fig. 798
DSCN-2660a
8
decal 119-0186
8-25