Toro GrandStand 74534 Service Manual page 157

HYDRAULIC DRIVE SYSTEM
2. Position a drain pan under the reservoir tank. Re-
move the low pressure return hose from the fitting
and drain the fluid into the pan (Fig. 507).
3. Remove the low pressure suction hose from the
reservoir fitting (Fig. 508).
6
6-24
Fig. 507 DSCN-2887a
Fig. 508 DSCN-2887a
4. Remove the two sets of bolts, washers and nuts
securing the reservoir tank to the tank bracket, then
remove the reservoir tank (Fig. 509).
Fig. 509
5. Loosen the jam nut securing the return hose fitting,
then remove the fitting (Fig. 510).
Fig. 510
36" & 40" Toro GrandStand Service Manual
DSCN-2890a
DSCN-2898a