5. Route the throttle cable downward between the
control cables and fuel tank, then forward under the
fuel tank shelf. Feed the throttle cable through the
"R" clamp located on the carrier frame (Fig. 294).
Fig. 294
6. Install the throttle cable "Z" bend into the engine
throttle lever (Fig. 295).
Fig. 295
36" & 40" Toro GrandStand Service Manual
7. Position the throttle cable to the engine throttle plate
and loosely install the screw and cable clamp (Fig.
296).
DSCN-3556a
8. Move the throttle lever to the "FAST" position (Fig.
297).
DSCN-3535a
CONTROLS
Fig. 296
DSCN-3505a
Fig. 297
DSCN-3536a
4
4-31