Toro GrandStand 74534 Service Manual page 48

39. Remove the two set screws securing the pump
pullies to the pump output shafts. Remove the pump
pullies, then remove the keys from the pump shaft
keyways (Fig. 112).
Fig. 112
40. Remove the four sets of carriage bolts, washers, and
nuts securing the pumps to the engine base (Fig.
113).
Fig. 113
36" & 40" Toro GrandStand Service Manual
41. Remove both pumps, with hoses attached, from the
engine base (Fig. 114).
DSCN-4080a
42. Remove the nut and lock washer securing the red
starter cable to the solenoid (Fig. 115).
DSCN-4079a
CHASSIS
Fig. 114 DSCN-4083a
Fig. 115 DSCN-4084a
3
3-29