ELECTRICAL
7. Remove the two thread forming screws securing the
solenoid the engine base plate (Fig. 829).
8
8-34
Fig. 829
DSCN-2280a
Solenoid Installation
1. Secure the solenoid to the engine base using two
thread forming screws (Fig. 830).
Fig. 830
2. Install the blue and green wires to the two small
studs on the solenoid using the wire's bullet con-
nectors (Fig. 831).
Fig. 831
36" & 40" Toro GrandStand Service Manual
DSCN-2280a
DSCN-2278a