Toro GrandStand 74534 Service Manual page 123

ENGINE
9. Using a feeler gauge, check the clutch air gap at
each of the three adjustment slots. Set the gap to
.015" (0.381mm). Make sure the gauge is inserted
between the armature and the rotor friction surfaces
(Fig. 383).
5
10. Install the spring washer (crown toward the bolt
head) and flat washer to the clutch bolt (Fig. 384).
5-12
Fig. 383 PICT-0554a
Fig. 384 IMG-9630a
11. Apply thread locking compound to the threads of the
clutch bolt (Fig. 385).
Fig. 385
12. Torque the clutch bolt to 55 ft-lbs. (75 Nm) (Fig.
386).
Fig. 386
36" & 40" Toro GrandStand Service Manual
PICT-8700a
DSCN-2612a