Toro GrandStand 74534 Service Manual page 256

3. Secure the starter positive cable to the LH solenoid
stud with a nut and lock washer. Torque to 35 in-lbs.
(4 Nm) (Fig. 832).
Fig. 832
8. Secure the positive battery cable and the wire
harness red wire eyelet to the solenoid using a nut
and lock washer, torque to 35 in-lbs. (4 Nm), then
position the positive cable terminal cover over the
terminal connection (Fig. 833).
Fig. 833
36" & 40" Toro GrandStand Service Manual
9. Position the battery onto the battery bracket then
secure the red positive cable to the battery positive
terminal using the bolt, washer, and nut (Fig. 834).
DSCN-2276a
10. Secure the black ground cable to the battery
negative terminal using the bolt, washer and nut
(Fig. 835).
DSCN-2353a
ELECTRICAL
Fig. 834 DSCN-2270a
Fig. 835 DSCN-2265a
8
8-35