Toro GrandStand 74534 Service Manual page 178

3. Remove the spindle shaft and blade from the spindle
housing (Fig. 573).
Fig. 573
4. With the spindle shaft firmly secured in a vise,
remove the nut and washer securing the blade to the
spindle shaft (Fig. 574).
Fig. 574
36" & 40" Toro GrandStand Service Manual
5. Remove the upper and lower bearings from the
spindle housing (Fig. 575).
DSCN-3179a
6. Remove the bearing spacer from the spindle
housing (Fig. 576).
Note: Inspect all spindle assembly components.
Replace any that are damaged or worn.
DSCN-3184a
MOWER DECK
Fig. 575
Fig. 576
DSCN-3185a
7
DSCN-3191a
7-9