47. Remove the two sets of carriage bolts and flange
nuts securing the engine base to the rear of the deck
(Fig. 120).
Fig. 120
48. Remove the two flange nuts securing the sides of
the engine base to the deck (Fig. 121).
Note: Do not remove the thread forming screws
from the deck.
Fig. 121
36" & 40" Toro GrandStand Service Manual
49. Using the hoist, raise the engine and engine base
from the mower deck.
50. Remove the four sets of bolts and Belleville washers
securing the engine to the engine base. The engine
base is now free to be removed. (Fig. 122).
DSCN-4098a
DSCN-4101a
CHASSIS
Fig. 122
DSCN-4108a
3
3-31