Toro GrandStand 74534 Service Manual page 78

13. Secure the position of the switch by tightening the
two mounting screws (Fig. 220).
Fig. 220
14. Secure the control cable to the motion control lever
using a shoulder bolt and flange nut (Fig. 221).
Fig. 221
36" & 40" Toro GrandStand Service Manual
15. Position the neutral switch bolt so the gap between
it and the switch is between .05" and .09" (1.27 and
2.29mm). Secure the position using the jam nut (Fig.
222).
DSCN-3666a
A. .05" to .09" (1.27 to 2.29mm)
DSCN-3610a
CONTROLS
A
Fig. 222 DSCN-3668a
4
4-11