Toro GrandStand 74534 Service Manual page 94

5. Install the choke cable "Z" bend into the engine
choke lever (Fig. 278).
Fig. 278
6. Position the choke cable to the engine throttle plate
and loosely install the screw and cable clamp (Fig.
279).
Fig. 279
36" & 40" Toro GrandStand Service Manual
7. Position the choke knob in the "OPEN" position (Fig.
280).
DSCN-3509a
8. Ensure the choke is fully open in the throat of the
carburetor (Fig. 281).
DSCN-3505a
CONTROLS
Fig. 280 DSCN-3525a
Fig. 281
DSCN-3528a
4
4-27