Toro GrandStand 74534 Service Manual page 102

11. Remove the nuts securing the cable to the control
assembly (Fig. 309).
Fig. 309
12. Remove the bolt, spacer, washer, and nut securing
the link assembly to the control assembly (Fig. 310).
Fig. 310
36" & 40" Toro GrandStand Service Manual
13. Remove the fastener assembly securing the speed
control handle to the control assembly (Fig. 311).
DSCN-3726a
14. Remove the nuts and washers securing the pulleys
to the control assembly (Fig. 312).
DSCN-3729a
CONTROLS
Fig. 311 DSCN-3732a
Fig. 312 DSCN-3741a
4
4-35