Toro GrandStand 74534 Service Manual page 33

CHASSIS
6. Remove the two thread forming screws securing the
shield, foot mat bracket, and foot mat to the platform
(Fig. 052).
3
7. Raise the rear of the machine and remove the tires.
8. Remove the RH and LH carriage bolts, washers,
spacers, and nuts securing the platform to the carrier
frame (Fig. 053).
3-14
Fig. 052 DSCN-0490a
Fig. 053 DSCN-3974a
9. Remove the carriage bolts, friction washers,
spacers, and nuts securing the pad link to the
platform (Fig. 054).
Fig. 054
10. Remove the knob from the platform latch pin (Fig.
055).
Fig. 055
36" & 40" Toro GrandStand Service Manual
DSCN-3978a
DSCN-0500a