MOWER DECK
40" Mower Deck Belts RH Idler Installation
1. Secure the idler pulley to the idler arm using the
carriage bolt, washer, and flange nut (Fig. 634).
Note: The taller side of the idler pulley hub faces the
idler arm (Fig. 635).
7
7-26
Fig. 634
DSCN-3275a
Fig. 635
DSCN-3239a
2. Place the bolt through the two washers, two friction
washers, spacer, and idler arm (Fig. 636).
Fig. 636
Note: The two friction washers must have the
spacer nested into their center (Fig. 637).
Fig. 637
36" & 40" Toro GrandStand Service Manual
DSCN-3277a
DSCN-3280a