8. Secure the front of the HOC plates to the control
tower using the bolt, washer, spacers, and nut.
Tighten the rear fastener assembly. (Fig. 263).
Fig. 263
Note: The HOC handle must be nested in between
the HOC plates (Fig. 264).
Fig. 264
36" & 40" Toro GrandStand Service Manual
9. Secure the HOC handle latch bolt to the control
tower using the two nuts (Fig. 265).
DSCN-3902a
10. Install the washer and snap ring that secure the
HOC handle to the frame (Fig. 266).
DSCN-3908a
CONTROLS
Fig. 265
DSCN-3912a
Fig. 266
DSCN-3843a
4
4-23