MOWER DECK
20. Install the extension spring to the idler bracket and
spring anchor (Fig. 592).
22. Install the belt covers.
7
7-14
Fig. 592
DSCN-3121a
36" Mower Deck Belt Idler
Replacement
36" Mower Deck Belt Idler Removal
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1" (25mm) HOC.
3. Remove the belt covers.
4. Remove the extension spring from the anchor post
(Fig. 593).
Fig. 593
5. Remove the belt from the idler pulley.
6. Raise the machine to access to underside of the
mower deck.
36" & 40" Toro GrandStand Service Manual
DSCN-3449a