Toro GrandStand 74534 Service Manual page 151

HYDRAULIC DRIVE SYSTEM
3. Loosen the four lug nuts (Fig. 484).
4. Raise the rear of the machine.
5. Release the parking brake.
6. Remove the four lug nuts and remove the tire (Fig.
485).
6
6-18
Fig. 484
DSCN-2805a
Fig. 485 DSCN-2805
7. Remove the wheel motor nut (Fig. 486).
Fig. 486
8. Install a hub puller (Toro p/n: TOR6006) onto the
wheel lug bolts (Fig. 487).
Note: The lug bolts need to be installed backwards
so the flat side is against the puller.
Fig. 487
36" & 40" Toro GrandStand Service Manual
DSCN-2806a
DSCN-2813a