CONTROLS
6. Secure the yoke at the lower end of the brake rod to
the brake assembly using the clevis pin (Fig. 245).
4
Note: With the brake handle in the off position,
measure the distance between the brake bar
and tire. The distance needs to be between
3/16" and 5/16" (5 and 8mm). If adjustment is
needed, remove the clevis pin and rotate the
yoke accordingly (Fig. 246).
B
C
A
A. Tire
B. Brake bar
4-18
Fig. 245
DSCN-3834a
Fig. 246
fig. 60 G012699
C. Gap between 3/16" &
5/16" (5 & 8mm)
7. Secure the clevis pin using the hairpin cotter (Fig.
247).
Fig. 247
36" & 40" Toro GrandStand Service Manual
DSCN-3837a